Placed on the side or top of the cabinet, for a custom, built-in bidet look. Our beautiful new triangular shaped valve, is a butter smooth quarter turn ceramic, made of heavy chrome plated brass.
It easily mounts thru a 3/4 inch hole, up to 1 1/2 wall thickness. The Thermostatic Mixer Valve mounts out of sight under your sink and attaches to the hot and cold water supply valves for your sink faucet.A 30 inch stainless steel mesh hose is supplied to run from the Mixer, along the back of your vanity, to the Vanity Valve. It is usually most convenient to mount the Vanity-Valve the same height as your toilet tissue holder, on the side of your vanity. Note the different parts in the above pictures and compare to your vanity construction, to get an idea of how it would be installed. The Undersink Kit was designed for use with the Ultimate Bidet, the Hydrawand, however it will work with any style of bidet that uses a standard 1/2 hand shower hose. The thermostatic mixer valve not only lets you preset your temperature, but provides protection from scalding, such as when someone flushes a toilet when you are in the shower and it gets momentarily hot. Warning, The Undersink Kit will spoil you! You will be tempted to sit and run the soothing warm fountain of your bidet far longer than you need to, and you will begin to hate using toilet paper.
The Undersink Kit provides all the parts needed for installation to the standard 3/8 inch valve outlets under most sinks. If your angle stop valves have larger 1/2 outlets, you will have to get different T's, or adapters, or change out your angle valves to our size. NOTE: Mounting the shutoff valve on the side of your vanity next to your toilet, as shown in the picture, requires drilling a 3/4 hole in your cabinet. The alternative is to store your bidet under your sink after every use, and connect it directly to the Mixer Valve.
Most plumbers can install this Kit in less than 20 minutes. The only tools needed are a drill and a couple of wrenches.
Unless you are a skilled handyman however, we do recommend professional installation. It is almost worth the price for the plumber, to not have to lay on your back under your sink and screw and unscrew hoses for 10 minutes. WHAT YOU GET FOR 169.95. Thermostatic Mixing Valve w/ Mounting Bracket.New Vanity-Mount 1/4 turn Shut-off Valve, Trim Plate, lock rings & spacers. Two 3/8 Brass Tee Valve Adapters. Two 16 Inch stainless mesh hoses. One 30 Inch Stainless Mesh Hose. (Wand not included in Sink Kit).
The item "Bidet Warm Water Thermostatic Mixing Valve & Complete Undersink Installation Kit" is in sale since Monday, December 18, 2017. This item is in the category "Home & Garden\Home Improvement\Plumbing & Fixtures\Bidets & Toilet Attachments".
The seller is "hydrawand" and is located in Bakersfield, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Bahamas, Viet nam, Uruguay, Aruba, Brunei darussalam, Bolivia, Ecuador, Egypt, Jordan, Sri lanka, Oman, Peru, Paraguay.